elkwood

Tung oil and beeswax are often used in woodworking to create a natural and authentic finish that emphasizes the natural beauty of the wood when creating signs and pictures. Here is a general guide on how to use them to create an aged or antique appearance:

Sand the Wood: First, sand the wood surface to create a smooth and even surface. Make sure to remove all the dust and debris.

Apply Tung Oil: Use a cloth or brush to apply tung oil to the wood surface. Tung oil is a natural oil that penetrates the wood grain to create a protective layer. Allow it to dry for at least 24 hours.

Sand Again: After the tung oil has dried, use a fine-grit sandpaper to lightly sand the surface. This will help to remove any raised grain or rough spots.

Apply Beeswax: Using a cloth or brush, apply a thin layer of melted beeswax to the surface. Beeswax is a natural wax that provides a protective coating and a soft sheen to the wood surface. Work in small areas at a time